When I then found out that Adidas was relaunching its Gazelle sneakers earlier this summer,…
Best Pioneer DDJ 1000 Black Friday Deals 2021 | Cyber Monday
Released earlier this season, the DDJ-1000 may be the first Pioneer DJcontroller designed especially for the Rekordbox software’s Performance Mode. Previous Rekordbox controller offerings like (DDJ-RB/R/X/Z) were essentially re-purposed versions of the classic Serato-designed type of controllers. Without deviating hugely from the typical style of controllers nowadays, the biggest draw of the controller may be the full CDJ2000NXS2 style, pressure sensitive platters, and a mini DJM-900 mixer, filled with a complete effects section. Get best black friday & Cyber Monday Sales, Offers.
Get Pioneer DDJ 1000 in cheapest Price in Black Friday & Cyber Monday Sales
Check Price Pioneer DDJ 1000 in Walmart, target, bestbuy, ebay,
THE VERY BEST of the DDJ-1000
Undoubtedly the stars of the controller, these platters feel lifted directly from the top-of-the-line CDJ 2000NXS line. As the jog displays within the platters offer useful information (BPM, waveforms, position indicators, phrasing count, deck assignment), it’s the feel of the platters that basically shines. If you’re not really acquainted with CDJ platters, the pressure sensitive design is far more advanced than the capacitive touch platters you find of all digital DJ controllers. Apart from an improved feel and response, in addition, it eliminates a whole lot of errors because of accidental touches.
Get Upto 60% Off Here
Get All Amazon Black Friday Offers Right Here
Adding tension adapt on the DDJ-1000’s platters is another welcome feature. This will be standard on every non-motorized platter that you can buy. This adjustment is particularly useful for DJs seeking to scratch or perform turntablism techniques on the controller.
Premium Build Quality
While the controller is made from a plastic base with some metal face plates on the platter areas, it is extremely solidly built, sporting the normal Pioneer DJ construction. There’s a heft and solidness to the controller that just feels reassuring. Without as solid feeling as some controllers with all-metal designs, the DDJ-1000 doesn’t feel cheap or flimsy – it feels much like even the best end Pioneer DJ gear.
The pots feel incredibly solid, the faders have the normal Pioneer feel, and almost everything feels as though it used parts taken directly from the top-of-the-line CDJ/DJM gear.
Sporting Pioneer DJ’s Magvel, no-contact fader technology, I could say certainly, this can be the best feeling crossfader I’ve ever applied to a controller. Even in comparison to other controllers offering the same fader tech (just like the SZ), the fader found in the DDJ-1000 feels about as near butter as possible.
Unlike the “clickier” feel of the Magvel faders entirely on SZ and even the DJM-900NXS2s, the fader installed on the DDJ-1000 feels almost identical to the Magvel Pro fader on the DJM-S9 battle mixer. Having said that, it can lack the extreme customization options on the S9 (tension and independent curve adjusts for the left and right side). As the DJM-S9 is virtually the defacto scratch/hip hop mixer nowadays, having this quality level is certainly a very important thing. The simple way to adapt cut lag (in the program preferences) is a welcome feature vs needing to root around in the Utility mode that other controllers offer.
The DDJ-1000 offers 18 different hardware effects to decide on – 4 color effects, 12 beat effects, and 2 Mobius effects (which are essentially Shepard Tone generators). The functionality, implementation, and layout is accurately just like a standard 4-channel DJM mixer. The workflow is identical and regular to the Pioneer DJ method of doing things.
Since these effects are totally hardware, they can be utilised on any audio tracks source – CDJs, vinyl, even the microphone input. The consequences sound great, are incredibly functional, and users will get very deep into using the consequences creatively. Add the many Rekordbox software effects, any effects junkies will maintain heaven with the combinations open to them. The only minus I see may be the insufficient crossfader assignment on channel selector – which is my de-facto effects assignment when I play on a DJM-900.
Looking for a less expensive controller to train knowledge of the Pioneer design of DJing? Search no further than the DDJ-1000
While this may be a detractor for all those that have a tendency to dislike Pioneer DJ design choices and aesthetics, you can’t say they haven’t been regular within their choices. The DDJ-1000 mirrors CDJ/DJM design and feel closer than any controller available to buy – even the standalone XDJ-RX2 controllers. The mixer section is actually a stripped-down DJM-900, and the platters and pitch sliders are taken directly off the best end CDJ-2000NXS2s.
The DDJ-1000 (top) is approximately as close as possible reach a NXS2 setup (bottom) in a DJ controller
Those buying lower cost controller to teach knowledge of the Pioneer DJ style setups, need search no further compared to the DDJ-1000 – although there won’t be the all-important standalone mode that a lot of people covet.
Nice, long pitch sliders brings about better resolution of pitch control. I’m surprised that more controllers don’t offer this beyond their highest end options.
While that is rapidly becoming the typical for all top end controllers, it’s nice to see all of the major output offerings upon this controller. XLR, RCA, and 1/4” TRS outputs are available, with the 1/4” outputs having a discrete volume control for a booth monitor.
I’ve long found almost all of Pioneer DJ’s offerings sounding, at best, acceptable. I usually recommended the sound of other companies’ offerings – especially when it comes to controller soundcards. Having the capacity to A/B test the DDJ-1000 against various other controllers and mixers in the marketplace, I came across a noticeable improvement in the DDJ-1000 sound quality.
It’s not yet determined if this is due to the internals in the controller, an improved sound card or DACs, the difference in processing in Rekordbox vs other software, or all of the above. That said, I did so just like the sound quality of the DDJ-1000 over a whole lot of other Pioneer DJ controllers available. For my taste, the highs remain a touch too sharp and the bass is just a little thinner in comparison to other hardware, but overall I believe the DDJ-1000 is probably the better offerings regarding sound quality from Pioneer DJ.
What COULD POSSIBLY BE Improved on the DDJ-1000
Locked to Rekordbox
Don’t misunderstand me, this isn’t a really knock on the Rekordbox DJ software; for the short timeframe it’s been available to buy, this is a surprisingly robust DJ suite with a great deal of features, advantages, and customizations that can be done. For me personally, a whole lot of my workflow is centered around Serato’s design decisions and features.
Learning new software is a committed action. Techniques and tasks that might be second nature and all but muscle memory in a single software have to be completely re-learned when switching to a fresh suite, plus some features are simply just unavailable. That is, of course, countered by a bunch of new and exciting features which can be incorporated into DJing, but if one must change their workflow and organization systems, it may be a deal breaker for most.
If this controller became Serato compatible, it might be – for me personally – among the finest controllers in the marketplace. Unfortunately, it is especially a Rekordbox DJ controller. That is as much an indictment of Serato’s business philosophy of keeping a closed system as Pioneer DJ’s philosophy of locking the controller to its software. The probability of seeing the controller be appropriate for Serato is pretty slim. There is going to be Traktor mappings available, although you’ll likely not get the entire make use of the platter screen.
Scratching on the Platters
Generally, the platters feel good for scratch, and having tension adapt goes quite a distance in assisting out the platter feel.
I did so notice a problem with the sound splitting up during ultra-slow drags – despite having the main element lock/master tempo switched off. Initially, I thought it had been a problem with the scratching algorithm in Rekordbox, but testing a similar thing in DVS mode didn’t cause the same issue. It seems this is a direct problem with the platter itself. It’s not so noticeable and only really happens with very slow scratches, nonetheless it was enough